• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The door replacement upvc window handles of your home are an important part of the interior design. A new handle will bring your home's decor modern.

Over time your knobs on your doors may begin to feel stiff or even break. These are signs it's time to change the knobs. This guide will help you choose the right door handle replacement handles for windows for your home.

Door Knobs

The handles on your doors can enhance the appearance of your home and allow you to open and close them. They are available in a wide range of colors, finishes and styles to complement your decor. If yours are starting to appear worn or you just want to upgrade, replacing them is relatively simple and can be completed in a few steps.

The first thing you need to find is the shaft or spindle through the knob's attachment to the door. Some knobs have a tiny hole that you can insert a narrow screwdriver into to remove the set screws that hold the knob in place. Some have a thin slot, or hole, that you can use to press the spring-activated detent pin using flathead. When you press this pin and the latch mechanism opens, it releases and lets you pull or push the knob.

Once you have access to the shaft or spindle, take off the door knob and replace it with the new one. Make sure to align it correctly and check to ensure that the latch works correctly before tightening the new set screws.

After replacing the knob, put the rod for latching over the door's hole and interlock it with the rod mechanism on the second knob. Make sure that the holes are aligned then thread the screws for the latch plate and tighten them.

Some homeowners opt for a brushed or smooth metal finish for their door hardware, giving their home a modern and sleek look. This will match the furniture they have. Others prefer a more rustic design that is a good match for farmhouse-styled spaces. If you have members of your household with mobility limitations You may think about a rim lock or lever-style door knobs that require less pressure to operate.

While aesthetics are traditionally the primary consideration for door handle design, other factors are becoming more important as well. Accessibility and control of infections are key issues that have led to the creation of innovative new handle designs like those that can be operated with the forearms of a person.

Latch

The latch that opens your door can wear out from the wear and tear of use. It is simple to replace the latch on your door handle. This will result in huge differences in how it opens and closes.

Depending on the kind of knob you have depending on the type of handle you have, the latch may be a part of the knob itself or it could be an individual piece attached to the door. In either case, you'll need to follow the same process for removing and replacing. It's easy to remove the old latch, particularly when you have a euro Door handles handle with a "magic" button. This tiny pressure-slot, found on the side knob, is what you will need to press in order to pop the latch out of the handle.

If your handle does not have this magical button, the first step is to remove any cover plates that rest over the latch plate. They are typically circular or rectangular and can be removed with a screwdriver. Some have slots where you can insert your screwdriver, while others simply snap off.

Then, remove the machine screws that attach the latch and the plate to the door handle. It is important to keep these screws with a pointed tip in a secure location so that you can reuse them in the future. After the screws have been removed, you are able to remove the latch plate as well as the mechanism from the hole, and then set it aside.

Then you can begin to install the new latch. Install the latch plate into the door hole and secure it using the hardware provided. Make sure the square pin on the interior of the latch is pointing towards the latching mechanism inside the handle and that it lines up with the other screw chambers of the door handle. Then fix the exterior latch plate using the screws supplied.

Strike Plate

One of the most common reasons for replacing a door handle is because it feels loose or isn't locking properly. This is typically caused by misaligned parts in the latching mechanism, such as the strike plate being too short or has moved upwards or down on the doorjamb over time. This simple fix allows you to replace your existing strike plate with a longer, new one that will provide better security and keep your door closed.

To check if the problem is due to the strike plate, apply some lipstick or a similar marking material to the bolt that is used to latch. Close the door, and then try to latch it. If the mark is lower than the strike plate's hole, it indicates that the plate is too small and the door won't latch. If the mark is above the strike plate hole, it's most likely that the strike plate has been moved upwards or downwards on the doorjamb.

You might be able to put the new strikeplate in place over the existing one using the screws included with it, depending on your door. However, you might need to pre-drill holes and then chisel some of the wood to make sure it's a good fit. If this is the case make sure you don't cut too much wood or you may ruin the integrity of the doorjamb.

Installing a brand new box-style strike plate will give the lock a more secure grip on the doors and will require more force to open them. It usually requires two larger screws to anchor the strike plate into the frame types of window handles the door. You'll have to remove the old strike plate and then drill and chisel the wood to make room for the new one.

This difficult-to-find strike plate was made to work with rim locks from the past, and it's made from sturdy solid brass in an extremely thick. This kit includes wood screws as well as machine screws, so you can select the appropriate hardware for your needs. Make sure to note that the wood screws have a sharp tip, whereas the machine ones are more blunt.