• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you're looking to increase the security of your home without compromising aesthetics choose sash lock door handles. They can be used with a mortice latch or sash lock, and can be paired with a night latch to provide additional locking for doors inside.

These handles consist of a handle/lever on backplates and are typically used with a three or five lever mortice lock. They can also be used with an elongated latch.

Lever Lock Handles

There are many different types of lever door handles available to match any home decor. Rustic lever latches work well with a ranch or farmhouse style decor and are also very popular in modern homes. Classic lever handles are round or spherical and are easy to hold. They are simple and affordable, and can be used with any type of decor. For a stylish look, opt for a polished chrome or satin nickel handle. These finishes are easy to clean and are durable. Other options include antique bronze as well as polished brass. A lot of handles feature a decorative design, such as small amber worm eyes or long-horned crystals. Others feature the shape of a pin or star molded into the top of the lever.

To change the lever lock door handles, you must have the right screwdriver, or a tool to remove the handles. Based on the model and design, you may need to employ an awl, or nail to remove the lever handle. Some lever handles come with an oblique notch or hole at the base of the handle which can be used to pull them open.

Follow the manufacturer's directions for removing your handles when you have the right tool. Make sure the spindle is in place on the new lever. Existing doors are often morticed (cut into the door) for latches that were previously used or locks and must be fitted to a certain spindle size. Most lever handle manufacturers offer an established door handle spindle size.

If you want to replace a sash window refurbishment lock door handle, take off the handle you have previously installed and disconnect the tubular latch bolt from the strike plate on the door frame. You will then need to drill a hole into the door frame, then insert the latch bolt through and connect it to the strike plate inside the door frame.

When installing a new lever door handle it is essential to know that all ADA (Americans with Disabilities Act) compliant handles are designed to be operated by hand and must not require users to grip tightly or twist their wrist. To ensure that they meet ADA compliance standards the lever door handle must be operated with fingers and thumbs or the entire hand.

Sash Lock Handles

The main function of sash locks is to seal the door by pulling the sashes moving tightly together. This prevents drafts from entering the room and helps to maintain the temperature of the home's interior, thereby reducing energy bills throughout the year. These are ideal for doors that do not call for a keyed lock.

sash window locks are sometimes called mortice sashlocks and combine a dead bolt and latch into one case fitted in the material of the door. They are often used in conjunction with a set of door handles and come in a variety of options.

Lever lock handle works with a lever on a backplate cut out beneath it, which permits a key to be inserted to operate the mortice sash secondary glazing lock. It is most often used on doors that are not locked such as living rooms and dining areas however it is also possible to pair it with a tubular latch for a more secure internal door.

They are designed to hold the timber sash windows in place at various points, and include a hook that fits inside the keeper. They are available in various styles and designs that are suitable for various window types like hinged or sliding casement windows. Some are made from cast aluminium while others are brass or wrought iron. They're available in a range of finishes that match other elements of your door furniture such as escutcheon plates that guard the keyhole.

The 3 lever sash locks are suitable for use on doors with internal doors. They do not offer the level of security required by insurance companies. They also have lower resistance to forced entry, making them more vulnerable than their certificated 5 lever counterparts.

A door sash lock that has 5 levers is a much better option for external doors because it offers higher levels of protection against forced entry and is harder to pick or bypass. The locks are upgraded in design that's been tested and certified to comply with the strictest fire, disability and building regulations.

The first step to replacing a sash lock handle is to remove the old fastener by removing the screws from each end. Be sure to have a screwdriver in your possession and carefully separate the pieces to avoid damaging them. Mark the screw holes using a pencil to place the new fastener in the correct position when you are ready to put it in place it. Remove any dust or paint flecks, then screw in the new fastener. Test the handle to make sure it works correctly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is an internal latch that can be operated by turning the handle. It is designed to close the door however, it doesn't secure the door as mortice locks do. They are typically used on doors that are internal and there is no need for locking. They can be fitted with knob or lever handles.

There are various sizes of tubular latch available. These range from economy through to the highest quality architectural quality. The size of the door is contingent on the purpose for which it is used and whether it is equipped with locks. For example the bathroom door might require a thumbturn and release mechanism in the event in an emergency, therefore you'll require an latch that can be locked.

The backset of your door will also determine the latch you select. You will need to choose the latch with an backset measurement that is in line with the distance between the edge and the center of your door's hole for the handle rose or knob. This will ensure your handle/door knobs will operate the latch smoothly.

If you are fitting an unsprung or sprung door knob or lever, it is crucial to choose a sturdy tubular latch with a double sprung follower and tongue. This will ensure a smooth and consistent latch action and stop it from becoming sluggish or unresponsive after prolonged use.

The next step is to install the latch onto the door. First, ensure that the latch is at a level with the top of the door frame or casing by measuring and marking the location of the latch plate then drilling holes for it. Utilizing a countersink drill bit will help to create the proper recess for it to fit comfortably into.

After the latch has been installed, you can fix it into the door. Before installing your door handles or locks it is essential to check that the latch functions properly. To check you need to open and close the door a few times. If it's not functioning properly, try lubricating the door using WD40. Then, try it again. If you are still experiencing problems then it might be necessary to speak with a locksmith or professional installer.

Keyhole Handles

Keyhole handles are fitted with the tubular latch placed inside the door to let it open and close it. The handle is able to engage the latch when pushed down and releases it when pulled up. These handles are usually used for doors that are inside like those in dining and living rooms. However they can also be affixed to front doors if they are coupled with a nightlatch.

Door knobs are a modern type of handle that incorporates spring-loaded levers/handles on a round or square fixing rose with a matching thumb turn or an escutcheon. They are available in various styles and finishes to suit the doors in your home. They can be used in conjunction with Euro cylinder locks or multipoint locking systems to add an additional layer of security to the door. This is achieved by locking the door at multiple points on the height of the door. Door handles that are compatible with the lock require the correct dimensions for the center of the lock to fit the barrel.

Keyhole escutcheons cover the keyhole that is already in the door to hide it and give the handle a sleek look. They are available in an open-top or screw-on style and are available in a variety of designs to match your door handle. A recessed escutcheon, that is fitted to the edge of the door to hide the keyhole and give it a more contemporary look, is also utilized.

Certain handles are compatible with Euro-cylinder locks. These handles are suitable to secure uPVC doors and require handles that have a Euro cylinder hole and screw holes in the backplate. These handles could also require a Euro-cylinder escutcheon, or a standard escutcheon depending on the application.

It is important to understand the distinctions between a sash or mortice lock and a tubular latch, as well as the compatibility requirements for each. It is important to take into account the thickness of the door, the door hinges, the frame reinforcements, the dimensions of the backplate for the handle, the lock's central dimensions, and the screw centres on the cylinder.