• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning and prevents thieves from driving the vehicle using original keys. Our latest immobiliser is connected to your vehicle's data network, CAN, and a unique PIN code must be entered in order for the engine to begin.

In contrast to trackers, Ghost does not transmit radio frequency signals and cannot be detected by diagnostic tools. There are also no LED indicators or buttons giving the impression that it is in your vehicle or van.

Anti-key cloning

The ghost immobiliser was designed to stop key cloning and hacking. The device connects to the CAN data network of your vehicle and generates a unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard and the steering wheel. This stops the criminal from being able to start your vehicle. If the wrong PIN code is entered, your engine cannot be started and it will be impossible for them to leave with your pride and joy.

Ghost immobilisers are new technology that is extremely hard for thieves to beat. The ghost immobiliser is different from physical deterrents like wheel locks or steering lock that can be cut, is a discrete electronic device. It can't even be recognized by thieves as it emits no radio signals and is operated in a silent manner.

This next-generation immobiliser will protect your car against a variety of threats, such as key-hacking relay attacks, key-hacking, and duplicate copies. It also stops the thief from adding a key or replacing your ECU because it won't permit them to start the vehicle without entering the correct PIN.

The ghost immobiliser 2, unlike other immobilisers, it does not require an external remote or key fob to operate. It can be deactivated from the driver's phone using a simple app. This makes it ideal for the times you have to hand your car over for valet parking or servicing without the key fobs.

The autowatch ghost 2 immobiliser Ghost-II is the latest version of our revolutionary ghost immobiliser. It was designed to be as easy and easy to use as it is possible, while remaining as secure as ever. This is accomplished by integrating the Ghost-II with the vehicle's CAN data network, which means there are no wires that are able to be hidden or easily found. It also has an inbuilt feature that lets you to disarm your Ghost-II by connecting to the vehicle's Bluetooth which means you can get in and drive, with no hassle.

OBD port hacking

OBD port hacking is the newest method employed by professional auto thieves to steal vehicles. Thieves are able to access your vehicle's OBD by using a laptop, a mobile application, and cables that can be bought online for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they like, from changing fault codes and tuning your car to stealing your pride and joy in under a minute.

If you have a Ghost immobiliser, it can protect your vehicle from theft using this method by needing a unique PIN sequence is entered on your key fob to start the engine and then drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. This is undetectable by any RF scanning technology or code grabbing. It also has a Service/Valet Mode that allows your vehicle to start without requiring a PIN code.

You'll also require a cable with OBD pins that connect to the CAN bus. These cables can be found on Amazon/Ebay for around PS50. You'll also require cables with OBD pins that are connected to the CAN bus, these can be found on Amazon/Ebay for about PS50. The next step is to connect the cable into the wire harness of your car for example, in the radio wiring harness.

Once the hacker has a connection to your vehicle's OBD port, they can send diagnostics to the system at a high baud rate which will crash the CAN, and prevent systems within your car from functioning. This could cause your vehicle's engine to stall or even shut down.

There is no need for additional remotes or key fobs

The car immobiliser is an excellent piece of anti-theft technology that is utilized by millions of modern cars across the globe. An aftermarket immobiliser protects your vehicle by using engine ECU software that blocks vehicles from starting when a false transponder is transmitted.

However, it could be simple for a burglar to bypass an immobiliser system in the event that they have access the code that allows them to disable it. The battery in most key fobs can be easily removed by prying it open which means that a burglar could make use of a simple tool to remove the immobiliser's internal circuit board and replace it with a blank. They will then be in a position to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent CAN data loop that cannot be detected by diagnostic tools like the ones used by high-tech thieves. It does not have a traditional keyfob with LED indicator, so it's inaccessible.

There will be times where you have to disable Autowatch Ghost 2's auto-protection for example, when you are doing a valet parking or servicing. Ghost CAN immobilisers come with a feature called 'Service Mode,' which you can activate with the push of a button on your phone. The car is still operated, but the maximum speed is restricted to 36mph for greater security.

Contact us today to schedule an appointment to see our workshop. A member of our team will explain the process, and give you your Ghost 2 emergency card, installation certificate, and security assurance.

Simple process to change the PIN code

Ghost 2 immobiliser is a new generation device that can secure your vehicle without cutting wires or putting in aftermarket key fobs. It connects directly to your vehicle's CAN data network and a personal PIN code is programmed in it by pressing buttons on your steering wheel & dash. The system stops engine start and can't be bypassed as there are no RF signals emitted from the device. This makes it impossible to be detected by sophisticated scans of RF and code-grabbing technologies employed by modern thieves.

The PIN code can be changed to lock out previous drivers, or even add an override number if you forget the sequence. The installer will show you the procedure to accomplish this during installation. The system also comes with the valet mode feature that can be used to temporarily disable the pin input sequence so that your garage or mechanic can repair the car without having to know the code. This is great for customers who want to give their vehicle for valet parking / service but still don't want to give away the PIN sequence.

Ghost is an individual system that utilizes the buttons on your car to create an unique and interchangeable PIN sequence. This sequence is entered using the app on your smartphone, which means no extra LED indications are thrown and your car is safe from the risk of being blocked by hackers or other technology.

Every vehicle is tested

In contrast to key fobs that require you to press buttons on them and a ghost immobiliser can be hidden under your dash or steering wheel so that only you know that it's there. The device is connected to your vehicle's CAN data network and an individual PIN code is programmed into it using buttons that are already present on your vehicle. The system will not allow your car to start until the code is entered. This means that thieves are unable to clone the keys of your car or access the OBD to hack into it.

Ghost can be used in all vehicles that use electric vehicles, vans, motorhomes and bikes. Ghost is also extremely flexible and can be set to disable in a variety of situations. For instance, it can be programmed to enter Valet mode when the car is taken to a valet parking or servicing company. This means that your car can be operated within a pre-determined 30mph speed limit, and the bmw m3 ghost installations reviews installer (https://mckinnon-fischer.Thoughtlanes.net/) immobiliser will reactivate itself once it is returned to your home.

Another excellent feature is that the device can be reset to your personalised PIN code at any point. This is great in the event that you lose the code, or when the device ceases to function.

It's also worth noting that the device is completely unnoticeable to anyone who isn't familiar with it. It works by running through existing buttons on your car's dashboard and steering wheel, and uses the data they transmit to recognise which button has been pressed. This makes it a secure and secure security system that can't be tampered by RF scanning, jamming, or a door lock pick set.