• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the saab 900 key 9-3

Saab owners must follow a set of steps that are unique to add an additional ignition key. It requires dealer assistance using a handheld computer dubbed Tech-2. Then, a new transponder and key are required to be purchased.

Rotate your keys to stop one from wearing out faster than the next. This will also keep your keys in top shape.

Replacement Case

The new key fobs do not look like the old Saab keys. They have electronics that make them difficult to copy. That has made car theft significantly more difficult than it was just a few years ago. It also makes it more expensive to replace keys lost.

Every owner of a Saab 9-3 should have at least two working keys. If one of them is lost, it costs a lot of money to add another to the car since it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100-$200 for this.

There are ways to reduce the high cost. Some parts dealers will use the code of a spare key to cut a brand new metal blade at a fraction what the dealer charges. The key, however, must be identical to the original one to function properly in your vehicle.

You can also change the case yourself by following these steps. You'll need an open-faced screwdriver and patience. Utilizing the screwdriver, slowly break the plastic and then separate the emergency key from the case. Once you have the case opened, take out the electronics and place them into the new case. Make sure to insert the correct key and badge back in the case too.

Replacement Battery

The replacement battery for the Saab 9-3 is an affordable part that can be replaced easily and quickly. This YouTube video by Cyclone Cyd demonstrates how you can replace the remote fob battery with just four simple steps. This tutorial can be used for any modern saab key fob though the process may vary slightly.

The button is normally located near the Saab logo on the back of the fob. This is usually located close to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver in the small hole in this button. This should be enough to open the fob's case to allow you to replace the battery.

After the new battery CR1632 is in place, you can reassemble the remote key fob and then program it to your car. The entire process should take no more than an hour at most. This is a simple procedure that doesn't require special tools.

The process is a bit more complicated if you've lost the key, but it's possible. The dealer must first read the VIN of the vehicle before requesting an alternative TWICE module, as well as a key blade that has the correct unique code. After that, they'll have to cut the new key and then program it using a brand new tool for programming called MDI.

Replacement Key Fob

The key fob has an internal battery that is used to lock and unlock your vehicle. They have a limited life span and eventually die. This is a regular issue that occurs with all vehicles, and the good news is that you can change the batteries on most fobs, without replacing the whole case. You can purchase fobs replacements on Amazon that have all the electronics already in place, so you'll simply open the case and replace the batteries in the original case. It is important to note that you'll need take out the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot found in the middle of the case. The case will split when you move the screwdriver around it.

If you're about to replace the keys make sure you have spare keys, because this can cut down the total cost by a significant amount. If you have a spare you can request that the dealer cut an entirely new key and then program it to the car, which is cheaper than replacing the entire key fob.

If you do not have a spare key, it is possible to add another key to your car, however this will require a lot of research and effort. A second key can cost around a hundred dollars and it also requires programming of the car's computer. Professionals can accomplish this, but it's an expensive option.

replacement saab 9-3 key Ignition

The new SAAB 9-3 is a more sophisticated alarm system built around a key code. This means that in the event that you lose your only working key, replacing it with another one can be very expensive because the car needs to have a specific computer module fitted and also needs to be specifically programmed to accept an additional key. The majority of locksmiths aren't able to do this or even a dealer will charge several hundred dollars just to program the new key!

If you've lost your only working key, a dealer will repair the computer in your car (known as the CIM or saab key programming near me TWICE) to make a replacement, and they will charge you a premium price for it. We can reprogram the existing EEPROM on your car's computer to make it ready to accept an additional key. This will save you more than 50% of the price you'd pay at an auto dealer.

If you've been a long-time owner of an 03-11 SAAB 9-3, you likely have noticed that the ignition switch isn't very durable. They can become extremely sticky, and the buttons can fall off occasionally and you should think about purchasing a new one if yours isn't functioning properly. The good news is that replacing the ignition key isn't as difficult as it seems, and it can be done quickly using the proper tools.