• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. However If you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation you'll need to source some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled under.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from getting into your property until a professional comes out to repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a number of problems, including sagging. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. First, you'll need to open the windows so you can access the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and verify the fit. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you aren't able to move the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and then perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most often, uPVC window repairs near me leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any competent DIYer. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread across the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it blows open with the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to replace a hinge on a window repairs however it is easier if someone else helps hold the frame.

Verify that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which way the window repair near me should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or due to improper installation in the factory. Sending us a photo via our website will often solve the issue. We are always happy to provide advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be misaligned due to wear, causing an opening between the frame and sash. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it may be possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.

The next most common cause of draughts is the window seals, these can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repairs, your upvc windows will continue to provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually wear out and it is more cost-effective to simply replace them than to repair them. So, if you're having issues with your upvc windows, it's best to seek professional assistance as soon as you can.