• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However when you have double pane windows that are held in place by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this instance you'll need to locate some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.

If you plan attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled.

It's a great idea tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional is able to repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, over time, they can suffer from a variety of issues like sagging. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window repairs which is sliding. First, you'll need to unblock the windows to access the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you can't reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen. The majority of the time, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose upvc window repairs handle. First, you'll need to close your window and do an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer can be applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is more with the seal than the frame. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open in a breeze It could be the hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It is an easy process but it can be simpler when you have a person to help hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window repairs near me should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to provide suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also because of wear and tear, can become misaligned, this can cause gaps to develop where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. The second is the interlock, which is located on the hinge of the window, can be misaligned. Again, it is possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and there may come the point when it's more efficient to replace them than fix them. If you have any problems with your Upvc window it is recommended to speak with an expert as soon as you can.