• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning and prevents thieves from driving it with the original keys. Our latest immobiliser is connected to your vehicle's CAN data network and a unique PIN must be entered to start the engine.

Ghost unlike trackers, does not emit radio frequency signals, and therefore cannot be detected by diagnostic tools. ghost 2 immobiliser reviews does not have LED indicators or buttons to indicate its presence in your car or van.

Anti-key Cloning

The ghost immobiliser has been designed to combat key cloning and hacking. This device connects to the CAN data network of your vehicle and generates an unique pin code push sequence using the factory buttons on your dashboard and the steering wheel. This prevents thieves from being able to start your vehicle. If the incorrect PIN code is entered, your engine cannot be started which makes it impossible for them to drive away with your pride and joy.

A ghost immobiliser uses an innovative technology that is very difficult for thieves to beat. The ghost immobiliser is different from physical deterrents like wheel locks or steering locks that are able to be cut, is a discreet electronic device. It isn't recognized by thieves as it emits no radio signals and operates silently.

This next generation immobiliser is able to protect your car from a range of threats including keys that are duplicated, key-hacking, and relay attacks. It also has the ability to prevent thieves from adding a new key or replacing your ECU, as it will not allow the vehicle to start without entering the correct PIN code before entering.

The ghost immobiliser 2 unlike other immobilisers does not require a remote control or key fob to operate. It can be turned off by using an app on the driver's smartphone. This is ideal for those times when you have to hand your car over to valet parking or for servicing without the key fobs.

The Autowatch ghost installations-II is the latest version of our revolutionary ghost immobiliser. It is designed to make it as simple and easy to use and yet be as secure as is possible. This is achieved by integrating the Ghost-II with the vehicle's CAN data network, which means there are no extra wires that are able to be hidden or easily found. It also comes with an integrated feature that allows you to disable your Ghost-II by connecting to the vehicle's Bluetooth and you'll be able to go out and drive with no hassle.

OBD port hacking

OBD port hacking is the latest technique used by professional car thieves. Thieves are able to access your vehicle's OBD using a laptop, ghostinstallations [click the following page] a mobile application, and a few cables that can be bought on the internet for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they want including setting fault codes, and tuning your vehicle to taking your joy and pride away in just a few seconds.

If you have a auto ghost immobiliser immobiliser, it can protect your vehicle from theft using this method, by needing an unique PIN code sequence is entered on your key fob to start the engine and drive away. It does this by interacting with the vehicles ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any RF scanning or code grabbing technology. It comes with a Service/Valet mode that allows your vehicle to start with no PIN code.

You'll also require an OBD cable that has OBD pins, which are connected to the CAN bus. These cables can be found on Amazon/Ebay for around PS50. Also, you will require a cable that has OBD pins that are connected to the CAN Bus. These cables are available on Amazon/Ebay around PS50. The cable has to be connected to the wiring harness of your car, such as the radio wiring harness.

Once the hacker has gained a connection to your vehicle's OBD port, they will send diagnostics to the system at a high baud rate that can crash the CAN and block systems in your car from working. This could cause the engine to stop, doors to lock and even the brakes to engage.

There is no need for additional remotes or key fobs

The car immobiliser is a fantastic piece of anti-theft technology utilized by millions of modern cars across the globe. Using engine ECU software to prevent vehicles from starting if a fake transponder signal is sent to it an aftermarket immobiliser can be a great way to protect your vehicle.

However, it could be easy for a thief to get around an immobiliser system in the event that they have access the code to deactivate it. The battery inside most key fobs is easily removed by prying it open which means that a burglar could use a simple tool to remove the immobiliser's inner circuit board and replace it with the blank. They will then be in a position to start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent CAN data loop that cannot be detected by diagnostic tools, such as those used by high-tech thieves. It does not have a traditional keyfob with LED indicators, which means it's inaccessible.

It is possible to disable Autowatch's Ghost 2 protection at times, such as during valet parking or during a service. Ghost CAN immobilisers feature a mode called 'Service Mode,' which you can activate by the push of a phone button. The car can still be operated however the maximum speed is restricted to 36 mph.

Contact us today to set up an appointment for a demonstration in our workshop. A member of our team will explain how the system works and will give you a ghost 2 immobiliser problems 2 emergency card, installation certificate, and security guarantee.

Simple Change of PIN Code

Ghost is the latest generation of device that secures your car without cutting wires, or installing aftermarket key fobs. It connects directly with the vehicle's CAN data network. A personal PIN can be set by pressing buttons on the steering wheel and dash. The device does not emit RF signals, which means it cannot be bypassed. This makes it inaccessible to sophisticated scans using RF or code-grabbing techniques that modern thieves employ.

The PIN code is able to be changed to block previous drivers, or even add an override number if you forget the sequence. During installation the installer will show how to accomplish this. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence so that your garage or mechanic can fix the vehicle without needing to know the pin code. This is ideal for those who want to give their car for valet parking / service but still don't want to give away the PIN sequence.

Ghost is an unobtrusive system that utilizes the buttons on your car to create an individual and interchangeable PIN sequence. The sequence is entered via the app on your smartphone, which means no extra LED indications are thrown and your car is safe from the risk of being disabled by hackers or any other technology.

Tested for every vehicle

Contrary to key fobs which require you to press buttons on them and a ghost immobiliser can be hidden under your steering wheel or dash so that only you know it's even there. The device is connected to the vehicle's CAN data network, and the personalised PIN code is inserted using existing buttons on your car. The system won't permit your car to start until this code is entered. This means that thieves can't clone the keys of your vehicle or gain access to the OBD to hack into it.

Ghost is a feature that can be found in any vehicle, including electric cars, vans motorhomes and bikes. It's also extremely flexible and can be programmed to shut down in a variety of situations. It is possible to program it to go into Valet mode, for example, when the vehicle is taken to a valet service or parking company. This permits you to drive your vehicle within a speed limit of 30 mph and the ghost immobiliser will activate itself when your vehicle is returned to your possession.

The device can also be reset at any time to your personal PIN code. This is a great option if you lose the code or when the device ceases to function.

The device is also completely undetectable by anyone who doesn't know about it is. It does this by analyzing the buttons on your steering wheel and dashboard and analyzing the data they send in order to identify the exact button that was hit. This makes it a secure and reliable security option that can't be tampered with by RF scanning, jamming or door lock pick sets.