• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazing Lock Repairs

Good locks on your windows and doors will stop burglars from entering your home. They aren't likely to break glass or try to squeeze through windows.

Certain double glazing owners however, have had issues with their window or door lock after installing. These problems can often be solved without the need for a new double glazing.

Broken or faulty locks

If your uPVC door or window lock is damaged or defective, then a locksmith can fix it. They can repair hinges, striker plate and locks for your double-glazing. They can also adjust the cylinder to fix any misalignment that could cause your handle to operate correctly.

If the key fits in the lock but it won't turn or is difficult to insert then the mechanism may be stuck. Grease or dirt can get stuck in the mechanism. If this is the case, it is possible to clean the lock and lubricate it. It is essential to make use of a dry lubricant such as teflon or graphite instead of oil, which can attract dirt and adhere to the inside of the mechanism. After lubricating the lock, you need to insert the key and then try to turn it. The lubricant should work its way into the mechanism, and the lock should spin easily.

A damaged lock can be caused by loose screws in the lock mechanism. They can loosen and fall out or break off completely and stop the lock from functioning properly. The screws can be tightened with a screwdriver, but be careful not to over tighten them. This could damage the internal components.

A broken lock can be hazardous for you and your family. This is especially true if you have small children. It can be easy for them to unlock the door without you knowing and thus allow them access to your home. If you're worried that this could occur, a professional locksmith can help to secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on both uPVC windows and doors. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.

Handles that are damaged or broken

As part of their overall security package many double-glazed windows come with a multipoint lock. This is a great option for those who are worried about opportunistic burglars trying to gain access to their home. Ask your installer about antilift blocks. These can be installed in addition to existing locks and can help keep your windows firmly shut.

It's not uncommon for the handle locks to get damaged or even fail - they are the first component of your window that could be pushed open by a criminal intent on breaking into. Luckily, the good news is that this is among the easiest parts to fix.

Modern uPVC and aluminium handles have a multi-point locking mechanism called Espagnolette that is designed to resist forced entry. This security upgrade is usually offered as an optional extra on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to lock bolts that shoot, again as an optional option on double-glazed windows.

If a handle is damaged, it's crucial to get it repaired as quickly as you can. Faulty handles can prevent the window from closing correctly and allow drafts in. It could also be a vulnerability that opportunistic thieves could take advantage of and put the belongings of your family and your personal belongings at risk.

The process of fixing the failed mechanism starts with opening the frame of the window and removing the broken handle. The gearbox can then be accessed to determine the type of gearbox used to open the handle. This allows an alternative that is compatible with the profile and the internal window frame mechanisms.

Once the mechanism has been replaced the handle can be re-affixed using the original screws however, jere alas (Jerealas says) we generally recommend replacing them with larger ones since this will provide an even more secure fit. The final step is to apply a coat of clear sealant to protect the handle from further corrosion. Once you've completed this step the window should be fully functional again at a fraction the cost of replacing it.

Hinges that are Broken or damaged

If your windows don't shut properly, you could be experiencing draughts, the weakening of your home's security, and an increased risk of damp or jerealas water damage. Broken or damaged window hinges are a typical problem that can be fixed easily.

If you have a window made of uPVC that won't open or close it's likely that the hinges are damaged or broken and require replacement. While a lot of window companies require you to purchase a new window to resolve this simple issue, we're able to replace the faulty hinges and save you money.

Window hinges are often damaged due to repeated use or Jere Alas could be weakened due to corrosion over time. In the event of a broken hinge, it's important to take measures to prevent further damage by being careful not to make the window swing to close or open.

The type of hinge you are looking for will help you locate the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It's best to consult an expert in this regard so that you don't make the mistake of purchasing parts that are not compatible with your existing hardware and could cause further damage.

The hinges that are not working properly can be a huge problem for uPVC doors and windows. They can be the main source of noise, and can also permit water to get into your windows.

Verify that the pin barrels on both sides of the hinge are aligned. If it isn't then tap the head pin with a hammer to make a small bend in the barrel of the hinge. This will help to keep the pin in place. Then, ask a helper to hold the door while you take the hinges and hinge screws from both the doorjamb and the door. Replace the hinges and install screws using glue. Finally, while the glue is drying, fix the hinges by using clamps or weights.

Once the hinges have been fixed, you should be able to install the door and attach the handle. It is recommended to replace the screws using the same length of dowels as the original screw so that they align with each the other.

Glass that is damaged or Faulty

uPVC Windows can become damaged in time, despite the fact they are excellent at keeping cold out and conserving warmth. This could include cracked or damaged glass, as well as faulty locks. If left unattended, this can become a very costly issue. It can also affect your home's aesthetics and lead to a loss in insulation. It is essential to fix any damage as soon as it occurs.

You can fix your cracked glass by yourself if you have the appropriate tools and techniques. Be sure that the area surrounding the glass that has been broken is free of debris, so that shards do not cause injury or cause a trip hazard. Then, take any broken pieces and dispose of them in a safe manner. Then, apply masking tape over the entire area to keep shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane before applying glue is an ideal option when you have windows that have two panes. This will ensure that you have enough space to complete your project.

Use a clean, dry cloth to wipe clean the surface of the broken glass and jerealas the frame before applying the glue. Follow the application and curing instructions that may differ from one product to the next. You may have to clamp the cracked glass using clamps that are lightweight and designed to hold fragile materials, depending on the angle.

After the adhesive has completely set, carefully place the glass into the window frame. Make sure it is aligned with the frame's edge and that there aren't any gaps between the glass sash and frame. Avoid bending the glass as you put it back in place in order to weaken the seal. This could lead to water infiltration or condensation.

If you have a glass window that is completely shattered or has larger cracks, consult a professional glazier like O'Brien(r) to organise an exchange. Leaving broken glass unattended can cause danger to pet and children It's therefore essential to act swiftly.