• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how new your Subaru is, you might need to have your key fob programmed by an automotive locksmith. This is usually done by connecting a machine for programming to the computer in the vehicle.

To program your subaru key cutting begin by unlocking the driver's door with the door button control then close it. You will hear a sound on the instrument panel, and the dome lights will light up.

Step 1: Locate the circuit board of your transmitter

There are a variety of ways to program your keyfob. First, you must determine the type of key fob that you have. You can determine this by studying the key fob's shape or by listening to the car's sound.

Once you have the necessary information, you can begin the process of programming your key fob at home. You will need an flathead and a steel key to accomplish this. The key fob can be opened by twisting. Then push the metal key in and release the battery from the small tabs which hold it in place. Replace the battery and then put the case back together.

Step 2: Remove the key fob case

It is a good idea to replace the batteries in key fobs in case they're not functioning. In some instances, the buttons on the key fob may be damaged. If you notice that the button's metal contacts have become loose then you can try applying solder back to them to ensure that they function properly.

Be sure to shut off your ignition and close your doors prior to you begin. Close the driver's side door and press your button 10 times in rapid succession. You should then hear the instrument panel chime and the dome lights will light up. This indicates you're now ready to move on.

Step 3. Insert the fob of the key into the ignition

There are a lot of articles online that will give instructions on how to replace subaru key fob to program a new or replacement subaru flip key key fob at home, but they are not very specific. Reprogramming an electronic lock is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with the doors shut and the engine turned off. Use the door button to unlock all the doors. Open and close the driver’s door twice more. Then, remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp when the settings are changed.

Step 4: Turn the Ignition On

It is essential to realize that this method of programming a key fob works if you already have a working key. If you don't an auto-locksmith or a dealer will need to program a key for your Subaru Fort Bliss.

Once the key has been programmed, it should be capable of starting your vehicle in about 5 seconds. To begin, ensure that all doors are closed and the engine is turned off. Next, get in the driver's seat, and then unlock all doors with the door button control. Insert the key into the ignition and turn it back to the first position. The electrical systems will be activated however, the engine remains in neutral. Repeat this procedure ten times.

Step 5 Step 5: Unlock the Driver's Door

Subaru offers a wide range of luxury cars that come with key fobs that lock and unlock doors, start the car, and defrost the windows. However, sometimes, these devices stop working properly.

To fix the issue, you should contact a locksmith or a dealer. This will resolve the issue and ensure that your vehicle is secure.

To do this, open the door to the driver's side and close it. Then, you need to place the ignition key in and switch it to the initial position. Then, turn it back to the off position. Do this as fast as you can for ten times. After the tenth rep, you should hear a chime.

Step 6 6. Press the Lock/Unlock Buttom on the Driver's Door

The procedure for replacing the battery in a Subaru remote key fob is simple. First, open the external fob casing. Then then, use the flathead screwdriver open the internal case and then remove the battery.

After taking the battery out then replace it with a new one. Close the case. Relax in the driver's seat and open all doors with the door button control. Place the key in ignition and turn it to ensure that the electrical system is on, but the engine is off. Repeat this ten times in a row until you hear the chime coming from the instrument panel. This will bring the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

For certain owners, the irritating sound that is heard when locking and unlocking a subaru lost keys key fob from outside can become distracting. In some cases the chirp can be disabled by closing and opening all doors and a double click of the lock button on the key fob.

Switch off the ignition and shut all the doors as well as the lid of the fuel-filler. For 10 seconds you need to press and hold the lock button on the key fob. Once this is completed the instrument panel emits an audible chime. The chirp signalizes that the fuel-filler lid and door are locked. It is possible to alter the setting to make doors lock automatically without having to push a switch.

Step 8 Step 8: Enter your Transmitter's 8-digit Number

Keep the first 8-digits in your mind. Now, climb into the driver's chair, close the doors and turn the key in the first position. After 10 turns, the instrument panel should chime once.

The circuit board for the transmitter is within the key fob case. The circuit board should be able to display one or two 8-digit numbers. Note the first number sequence and follow the instructions in this guide to register the code on the system of your vehicle. This procedure may require a visit to the dealer for older models.