• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Fitting a cat flap can seem intimidating but it's simple with the proper instructions. First, determine the height you want the flap to be (on average the belly height). Mark this point on the door and use the template provided as a guide to drill.

If you have a kitten that is still a baby and you want to keep the door open, gently prop it slightly open and invite it to go through. Reward it each time it goes through.

Take a measurement of the door

A cat flap is a great method to let your pet move in and out of your home whenever it likes. This will help keep your cat healthy by making sure that it gets exercise as well as being able to go back in if stuck outside in bad weather, particularly during the winter. This will reduce the amount of time you allow your cat out or in, and keep your home safe by notifying you when it's left.

However, it is important that the flap for your cat is fitted correctly to prevent your pet from escaping through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet's belly as well as the height of the doorway at your home to ensure the flap is at the right height. If your cat is taller or shorter than normal, you can adjust the position of the flap by moving it up or down by a tiny amount.

Then, use a spirit-level to mark the center of the door. This is where you will put in the flap. Utilizing the marking as a guideline, you can use a jigsaw and cut out the form of the flap inside the door. Once you've cut the space, sand down the edges of the door to create smooth surfaces. You can then drill any fixing holes needed.

Fitting a cat flap should not take longer than two hours. The process can be slightly more difficult if you have to install it in the form of a uPVC door or a composite one. This is due to the fact that these doors are available in a variety of thicknesses, which can impact the way the holes are cut. This is why we recommend hiring an expert to do the task, especially in the event that you've never worked with glass before.

Measure Your Cat

You will not have to spend hours of ignoring the cat's meows to be let in or out. This is particularly helpful when you're at work all day and your cat is in the waiting room until you come home in any weather.

If you want to fit a cat flap inside your door, it is crucial that you measure your cat before attempting the task. It might seem like a straightforward task, but it is essential to measure your cat correctly. In the event that you don't, your cat might find it difficult to use.

Firstly, make sure your double glazing cat flap is calm and not feeling stressed before you take the measurements. You'll need to keep them in a manner that they are not able to move, and ensure that the measuring tape or ruler is flat against their body, not arching in any places. You can take a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you've figured out the measurements of your cat's body, it's time to look at the door and decide where to place the flap. Position the flap at the level of your cat's belly. This will allow them to pass through the door with minimal effort. This will also stop the flap from making a lot of noise as it moves back and back.

You should take into consideration the thickness of the uPVC or composite door as well. While timber doors are all of the same thickness, uPVC and composite doors are different in their overall structure and can make fitting a cat flap more difficult as you will need to make sure the hole you make is the proper size for your pet.

It is also worth looking through the instructions included with the cat flap kit to locate an illustration template that can be used to determine the position of the hole in the door. This will enable you to determine where the hole should be located and make sure that the template is placed precisely on the door. It is also helpful to employ a spirit-level to ensure that the template is placed in a straight line against the door.

Cut the Flap

You'll need to cut a hole in the door panel for your cat flap prior to you can install it. This is a difficult task and it is recommended to seek out the assistance of an expert cat flap double glazing flap fitter for this step should you not have the knowledge or skills to complete the task yourself. You can also refer to the instructions that come with the kit to learn how to do it properly.

To do this you need to measure the height of your cat's or kitten's belly and use that as a reference point. A good rule of thumb is to put the flap of your cat about 10 centimeters off the ground, as this is approximately the average belly height for cats. Your cat will be able to go through the flap comfortably and will also make the other cats or neighbours who are snooping an issue when trying to leave or enter.

Mark the position of the cat flap on the door using pencil. Next, if your kit includes an outline of paper, place it on top of the door and use the markings to drill holes into each corner of the template. After that, you'll be able to cut out the template shape and replace it with the cat flap.

If you are installing your cat flap inside the form of a door made of wood or uPVC, it is possible to do it yourself if feel confident enough to handle using a Jigsaw. Ensure that you do not cut into any of the door's mullions or vertical rails. You can use a Jigsaw to cut your panel into a circle or square according to the way you'd like to cut it. Take your time, and don't try to force the jigsaw to cut faster.

Once the hole is cut, carefully place your cat flap in its new home. Make sure it is securely secured. If it has caps on the screws, then place them onto the screws that protrude. Once the screws are in place, sand the rough edges of the cut and then seal any gaps to ensure there aren't any draughts entering into your home.

Place the Flap

If you have a basic cat flap, you can leave it open and encourage your pet to walk through by putting a small amount of cat food in front of the door. You can also push the cat using sticks or your hand. Once your pet has become used to walking through the flap it will be capable of walking through the flap as it pleases. This lets you let it in and out whenever it wants.

You can fit an animal flap inside the UPVC or glass doors however it's not as simple as fitting it into a wooden external door because the UPVC and glass doors don't have the same thickness. This could have an enormous impact on how you cut out the flap hole and also whether the flap will fit correctly after installation.

The mounting kit may include a template that shows you where to drill holes. If the kit does not include a template, you are able to make one by yourself. It is important not to use the jigsaw to hard when cutting, so it doesn't leave a bigger than needed hole in your door.

Most cat flap step flaps are square or rectangular in shape but there are some that are circular, and are generally more difficult to place. If you have a round flap, make sure that the hole is in the correct spot on the door. In the event that it is not, the cat might not be able use it, and could be stuck outside the whole day (or at night).

Certain cat flaps have locks that allow you to control the time your cat can enter and leave. These are very helpful when you're concerned about your cat going out at night and then coming back in the darkness, or you're at work all day. Some locks can be used to lock entrance or exit, while others can be locked both ways. This is useful for older cats or sick cats who don't want to venture out in cold weather.