• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet move around as they please without you needing to let them in or out. They also can help stop your cat from peeing in the home.

It is simpler to install the cat flap on a upvc panel than one made of glass, but you will require some expertise and right tools.

Measure the Door

The installation of a cat flap inside a door can be tricky but as long as you use the correct type of cat flap, take your time and follow the instructions provided it shouldn't be too much trouble. We will show you how much to install a cat flap to draw the shape, use the jigsaw to slice the door's opening and then finish the job by securing the flap to the door. This will ensure the flap remains in place and shields the doors from the damage caused by rain and wind.

The first thing to do is measure the width of your pet in order to get a precise measurement of what size of cat flap you will require. This will ensure that the flap is large enough to allow your pet to enter and leave the house without having to open or close the door every time, but it is also small enough to prevent the pet from straying too far in either direction.

Once you have the measurements you can mark where on the door the template should be positioned, usually, this is done using an X, however some kits come with a drawing that shows the location to drill, if yours does then stick it to the door and draw a line around it. If your door has a sill or moulding at the bottom, make sure you leave plenty of space between your cat and these elements.

Put on your eye protection and dust mask. Then using a jigsaw begin to cut according to the lines you've drawn in. Don't press the blade too hard as this can cause it to cut more quickly than you'd like it to. Set the square with a ruler to ensure that you are cutting the material correctly and that the cut is a rectangle shape. When you are satisfied with the final result, you can take the door material off.

Draw a Line

The cat flap lets you to let your pet in and out without worrying about unwanted visitors or unwelcome gifts. It also prevents draughts, and helps to keep your home's temperature stable. Fitting Cat Flap In Upvc Door Panel (Lovewiki.Faith) a cat flap to your door can be a daunting task for those who haven't attempted it before. Many people call a professional carpenter or joiner to do the work. This is a viable option, however you can do it yourself if your tools are right and the instructions are followed.

While this is much simpler with a wooden door, it is still possible to do this in uPVC doors, but you should be cautious not to damage the doors since this could invalidate your warranty. First, you must take measurements of the door to ensure it will accommodate the new cat-flap. If you have an ordinary uPVC panel, this should be easy. However, if your door is made of composite or another kind of door, you may require more care.

Next, you will need to determine the height of your belly for your cat. This is the amount of height between the floor and the underside of your cat's stomach. You will need to locate a space on the door that allows your cat to move through wall cat flap easily. Once you have this information you'll be required to mark the area with pencil and a spirit level to be sure that the hole you will create will fit your cat.

Once you have marked out the area, it's time to cut out the hole. You will need to use a jigsaw and it is crucial to be patient to ensure that the cuts are clean and smooth, rather than uneven and rough, as this could damage your door. Wear safety glasses and a dust mask when working with a jigsaw. Inhaling sawdust is dangerous for your health. Once you've finished cutting the hole, you'll require sandpaper for smoothing the edges so that the cat flap is easily fitted into place.

Cut a hole

It isn't easy to install a cat flap into a door panel or sealed double glazing unit. If you're not proficient in DIY, it's best to employ a professional to complete the work for you. A shoddy job might not only be unsightly but also an enigma for security and also allow cold air to get in when the cat is outside, and hot air to escape once inside.

Mark the hole position on the door using the help of a pencil and a spirit level. This will ensure it is correctly positioned and is flush with the rest of the door. Make sure to have sandpaper to smooth out any rough edges.

Wear any safety equipment you'll need to use the power tool. If you are concerned about the sound produced by the jigsaw, consider buying an electric version that is quieter and simpler to use.

It is important that you only remove the material that is required to make the cat flap. It is necessary to leave a little extra material to make the through wall cat flap thickness of the flap. However cutting off too much material can cause issues or even damage to the frame of the door.

A door made of upvc may have a metal frame or panel which could block the microchip cat flap and in this case you'll need to cut an oversize hole so that the metal does not come into contact with the wall of the cat flap. If this is done it is crucial to fill in the oversize gap and make it watertight.

If you're looking to install a cat flap in a upvc or double-glazed window with frames made of metal you'll need to talk to a specialist. They can offer you a brand new piece of glass with the hole already pre-made for the cat flap. It is cheaper to get this done rather than to attempt to fix the flap to an existing glass pane that hasn't been designed specifically for the purpose.

Fit the Flap

Cat flaps allow your pet to leave and come as they please, giving them the ability to unwind inside the house when they want to. If you have an uPVC front door, it might be difficult to put in the cat flap. This is particularly true if you do not own glass panels which can be cut. If you're looking to install a half-glazed uPVC replacement panel, it's possible to add a cat flap. It's not a simple matter of cutting an opening in the door. It is also necessary to perform a few steps to ensure that it is safe.

A composite, uPVC or GRP door panel is usually composed of a thin plastic skin which is bonded to an insulating polystyrene base. It is essential to be cautious when cutting the material. This kind of door has a template you can use to make the hole.

Once you've determined the location of the hole in your door, now it's time to put in the cat flap. You can purchase and install a wide variety of different models including basic push-button operated models to microchip activated units that only let in your pet. However, no matter what type of cat flap you choose it is essential to ensure that your cat can use the flap without becoming stuck outside in the rain.

It's a good idea to opt for circular fittings instead of one that is square, since circles are more securely cut into door glass. This is because square holes are more likely to break the glass when they're drilled. This is also a safer choice because you won't need to drill into the toughened glass which could break and cause harm to your pet or your family members. This is particularly crucial if you have children or elderly people in your home that could be hurt by glass fragments.