• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized possession from theft. This system is discrete and does not require additional key fobs in order to operate.

The device uses existing buttons in your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence that can be up to 20 presses long. This then authorizes the startup of your vehicle.

Simple PIN code Change Process

Many owners are upgrading their security because of the rising number of vehicle thefts. There are a variety of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system may assist in finding your car in the event of theft, it does not prevent the crime from happening in the first place. An immobiliser, on the contrary, does exactly what it says on the label: it shuts off your car's engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your car.

Using the existing buttons in your car, the ghost immobiliser fitter device creates an exclusive sequence that has to be entered before the car's engine can start. This can be accomplished using the indicator stalk windows or heater buttons. In addition option, there is an app for mobile devices that can act as an emergency PIN code override and allows the driver to operate the car without having to use the button sequence. This feature is particularly useful when you need to hand your car over to a valet service or parking since the immobiliser will still be active and not deactivated.

The Ghost is a unique and ingenious device that works in conjunction with the buttons of your car instead of being a separate device. This means it's not only a highly effective security measure against theft from your vehicle but can also be transferred over to any future cars you may own, making it much more investment-wise than the traditional lock on your steering wheel.

Weatherproof tiny device

The Autowatch ghost immobiliser is a high-tech security system that protects your car from key cloning, hacking & ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices that are an approach used frequently by car thieves to circumvent existing immobilisers.

The advantage of using CAN data is that it runs silently in comparison to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console, or door panels, to create a an unique sequence of disarming. You can make this sequence up to 20 presses long to increase security. The iPhone app allows only one connection, with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost also stops car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run if a valid PIN code has been entered. It can also be put in valet/service mode to allow for temporary operation (with set parameters such as 30mph speed limit) to allow you to hand your car over to a valet service or for servicing without the need to enter a PIN code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals that block your car's system from performing its normal start-up routine until you input the passcode you have created. The system can be activated or deactivated by using your smartphone app without the need for additional wires.

Standard factory immobilisers for vehicles function by using a transponder built into the key that sends an indication to the ECU. If the correct code is sent, the car will start, but if a transponder is replaced with one from another vehicle the immobiliser cannot recognize it. This makes it possible for the vehicle to start and be stolen. A South African company that is at the forefront of car security systems technology created the ghost alarm installation immobiliser. It protects your car from hacking, key cloning and even key theft. The only way thieves could take your car is by physically towing it away and even then, they wouldn't be able to drive it.

Ghost utilizes the buttons of your car, such as the indicator stalk, steering wheel and door panels to create a unique PIN sequence that can be changed that must be entered before you can use your car. This is done without any extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also undetectable to diagnostics equipment and does not transmit radio frequency signals so thieves cannot utilize sophisticated RF scanning or code grabbing techniques to discover that the security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks audi rs6 ghost installer is hidden within the vehicle, so it cannot be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm that requires disarming using an action sequence. This makes it an excellent alternative to a GPS tracker which helps locate your car after it has been stolen.

Override of emergency PIN code

You do not have to look far on social media to find stories or even videos of vehicles that have been taken by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow you to start your car without the original keys.

The Ghost immobiliser was designed to stop this and provide you with an extra layer of security to keep your vehicle from being targeted by thieves. It works by creating an unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel and the center console. This unique PIN has to be entered together with your original key fob in order to stop the vehicle from starting. The unique override pin can be found on the black card you will receive following your installation and is easy to remember because there are no LED indications.

The device is hidden inside the vehicle's wiring and doesn't emit any radio signals, so it isn't able to be recognized by criminals with diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Contrary to most security systems, which have a relay inside the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependant). This allows them to block a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems, but this has to be specified prior to installing the device. They are also fully service/valet mode compatible and a great alternative to a tracker when having your car in for an electrical fault at the dealership.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen without the owners keys. With easy access to key cloning equipment and door lock pick sets it is now much easier for thieves to steal your prized possessions. To prevent this from happening, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys were cloned or your car was stolen.

It directly communicates with your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't use radio frequency or key fobs. This means it cannot be detected by diagnostics or other car hacking devices. It also prevents the user from using a new ECU or key to bypass the system since only the PIN code allows the engine to be started.

The device is concealed inside your car, using buttons on the steering wheel, the centre console and door panels. A unique & changeable PIN code sequence of up to 20 digits must be entered before you can start your car.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car being driven away or started in the event that a PIN code hasn't been entered prior to. If the device is in armed and you try to drive off it will display a warning on your dash that will flash regularly for around 300m. If you type in your PIN code at this point, it will disarm the anti-hijack and your car will continue to drive just as normal. If you do not enter your PIN at this point, the warning will keep flashing & will require a new PIN code for every attempt to start your car.