• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Add Warmth to Your Home With a Fireplace Wall Mount

A fireplace wall mount will provide warmth and ambiance to any space, whether in your office, home, or commercial space. They are simple to set up and include mounting brackets that can be used for hanging or recessing into walls.

For a simple and quick installation, follow the directions on the manufacturer's site. Make sure that the wall mounting bracket and the bottom of the fireplace go together, then fix it to the wall.

Size

A wall-mounted electric fireplace can be a focal point in a room that creates warmth and atmosphere. They are available in a range of sizes that can fit in all spaces. A smaller unit would be perfect for a bedroom while a larger unit could be used in the living room or family room. Some models also come with a recessed option for installing them in a flush position against the wall to create a seamless appearance.

The height of a fireplace wall mount can determine the way it appears in the room. To create a dramatic effect some people opt to place them higher on the wall, typically 6 to 12 inches above the ground. Others prefer to mount them at the standard TV height of 4.5 to 5 feet that lets the fire be seen from all seating positions in the room.

No matter what size you decide to go with it is crucial to keep in mind certain factors to ensure your fireplace is secure and efficient. For instance, you must ensure that all combustible objects are kept at a minimum of three feet away from the flame, including drapes and furnishings. If possible, also fix the brackets for mounting to studs. If you can't find studs you can use plastic anchors. This will ensure that the fireplace won't be pulled away.

When selecting a fireplace mount, it's important to take into consideration the amount of heat it creates. In general, you should select one that produces around the same amount of heat as an average electric heater. This guideline will ensure that your fireplace can provide sufficient heat for the entire room.

Certain fireplaces feature specific features that make them stand out from other fireplaces wooden. Some fireplaces come with remote control operation, adjustable settings for brightness, as well as no-heat mode. They also feature cool-to-the-touch glass and realistic-looking LED flames. Other noteworthy features include a built-in shelf for holding electronics and a simple installation process that doesn't require any expert assistance.

Installation

A fireplace wall mount, in contrast to an electrical fire that must be hard-wired into the electrical system in your home It is semi-permanent. It can be hung directly on a wall, or into a bracket that is then fixed to the wall. It is important to choose a location that is close enough to an electrical outlet for the power cord to reach, while also providing sufficient clearance to nearby objects as per the recommendations of the manufacturer in the manual for your owner.

Before starting the installation process, be sure that your fireplace is operating in good properly by plugging it in and playing with its LED lights and heating settings. This will tell you whether it is prepared for installation or if it requires to be further tested.

Prepare the area in which you'll install your fireplace mount. Depending on the model you purchase, this could mean mounting a bump out onto the wall or covering the wall with drywall. In the second scenario ensure that you employ proper drywall techniques such as taping and mudding, allowing it to dry completely before proceeding.

After the walls have been prepared and the brackets are attached to the wall using screws. The brackets should be fixed to the studs which are in the wall behind the drywall. This will prevent the fireplace from slipping away from the wall in the future.

When the bracket is secured, it's time to mount the fireplace itself. The way to mount the fireplace varies from model to model, however, generally there is a ledge on which the fireplace will sit and a place to attach it to the brackets on top. You can then add additional media, like logs or embers.

Additionally, some models permit you to fit the firebox and screen together on a wall bracket. This makes the installation a lot easier but it is crucial to check that everything fits properly and is secure prior to the final step.

Once the fireplace is in position, you can complete the appearance by tacking or screwing the bracket to the wall and trimming any wires that aren't needed. If you wish, you could also use paintable wire covers to disguise your power cord.

Safety

A fireplace wall mount is an ideal method of heating your home without occupying floor space. It is essential to take safety precautions with this type of fireplace. The first step is to ensure that the fireplace is grounded, which will help prevent electric shock. Make sure you read the instructions provided by the manufacturer for proper use.

While it is possible find wall-mounted electric fires that don't generate any heat, most of them will feature a form of heater to increase the realism and ambiance of the flame effects. This usually takes the form of a fan-forced heating device that blows air through a heating element, however some models could have an infrared heater as well.

After the fireplace is installed, it is crucial to stay clear of touching the hot surface. This could cause burns or damage the device. To reduce the risk of fire keep combustibles no more than three feet away from the fireplace. You should also be careful not to block the vents at the side of the fireplace.

There are a few other security features to consider when selecting an electric fireplace wall mount. For instance, you should be sure that the device has an emergency shut-off switch to avoid overheating and fires. It is also an ideal idea to buy an appliance that has a low heat output, as this will save energy.

Another important consideration is the material that the surround is made from. Choose a material which is safe for pets and children, such as wood veneers, steel, or glass. Additionally, you should select a model that has an LCD display or remote control to allow you to operate it effortlessly.

There are many types of wall-mounted fireplaces, such as electric and ethanol. The right one for you will depend on your budget and the style of your home. You can be certain to add warmth and elegance in your home, whether you select an ethanol or electric fireplace. Be sure to follow the safety guidelines given by the manufacturer. Also, ensure your family and pets safe when using this fireplace.

Style

The design of a fireplace wall mount determines how it will look on the walls of your home. Certain models are designed to stand out while others blend in with the decor of your room. For instance, a modern model such as the Streamlined wall-mounted Electric Firesuite fireplace has a the sleek front glass design and a minimalist design. It has top venting that allows heated air to flow smoothly, while maintaining the fireplace’s stylish design. Its flat mount and easy-to-use remote make it easy to operate.

There are also wall-mounted electric fireplaces with more traditional-looking mantels. These units are ideal for homes with open hearths or those looking to transform a firebox that is wood-burning into an electric fireplace without a chimney. These flat-wall fireplaces are available in various dimensions, and often come with a shelf for display decorations. These fireplaces electric are great for living rooms, bedrooms and home offices.

Gas wall-mount fireplaces are a great option for those looking to create a warm, warm and inviting ambience in their homes. They come with a traditional log set and are available in several different frame finishes such as black and natural stone. They also come with an ember bed that can be customized and LED flame colors for personalization. Some models come with an integrated TV mount that can be used for additional functionality.

Some models can be mounted directly on the wall while others are designed to be partially or completely recessed into a wall. For instance the Allusion wall-mount gas fireplace is with a slim footprint that permits it to be recessed into 2x6-framed walls, however, you can put a skirt on top to cover the exposed portion of the fireplace. The Allusion also has a convenient remote control and a variety of heat settings, so you can use your fireplace all year round.

Surface-mounted electric fires typically project 4 to 6 inches into the room. They're therefore less difficult to install than models built into a wall cavity or recessed into the wall. Renters will also be pleased with the ease of installation because they don't have to be concerned about drilling holes into their walls. You can simply remove or reposition the fireplace when you move.