• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle Replacement

Door handles appear to be a small detail but if you aren't happy with the style or design of them, or find them difficult to use then it's time to replace them. With a bit of patience, you can put in the new handle in no time.

Most modern door handles have cover plates that hide the screws to create a stylish appearance. However, you'll have to attach them separately if your new handle doesn't already have them.

Remove the old handle

Door handles aren't just an an important aesthetic addition to your home, but they're essential for security as they let you lock and unlock your door. Over time the door handle can become loose or feel loose. It might also appear aged and worn. This is a sign that it's probably the time to replace your door handle.

If your door handle is becoming difficult to use, it may be time to replace it. This is an issue because it means you can not lock or unlock your door which could pose an security risk to you and your family.

It is also a good idea to replace your door handle in the event that it's damaged or broken. A damaged or broken door handle can be dangerous, especially for children and elderly family members who may struggle to open it. They could be trapped. It's easy to replace a damaged handle on a door.

Most modern door handles are standard size, so they should fit any door. If you are not sure if your new door handle will work, take out the old one and measure the holes in its housing. This will help you to purchase the right size door handle.

It is the easiest method to remove the door handle by removing it from the door. Usually you'll need a screwdriver. However certain door handles come with a cover plate that conceals the mounting screws, so you'll have to cut off this cover plate to get access to the screws underneath. Once you've removed your old handle, take a note of how the spindle is connected to ensure you are able to align it when you fit your new one.

You can also remove the bifold door handle replacement handle by removing the latch mechanism. This is usually done with a screwdriver but you'll need to find the small latch, which is located at the edge of the trim piece. After you have removed the latch, take the handle off the strike plate and then the latch from the door edge.

The Strike Plate

When replacing your handle, you'll also need to replace the latch plate, which is the hole which the upvc door locks and handles's latch hooks into when it closes. The new handles will come with two latch plates that are circular and rectangular plate (see the above diagram that shows the parts of the door handle). If you have an rectangular latch plate, you can replace it with a circular one. This will allow the latch to hook into the strike plate and make the handle easier.

The first step is to remove the screw that holds the old latch plate. The screws can be very tight, and will require some force to loosen. If possible, it may be beneficial to have a second person assist you with this task.

Once the screws are removed the latch should pull out of the door easily. If it's stuck or won't move, use a small nail file to scrape around the edges of the latch plate. This can help loosen the plate.

Now you can prepare the new strike plate to be installed. Attach the latch plate to the door jamb using the screws that were included with the new double glazed windows handles. Don't over tighten your screws as this could cause damage to the strike plate.

If you are not sure whether the latch plate is in its correct position, close and open the door to determine whether it latches and closes correctly. If not, you'll need to adjust the strike plate upwards or down, or even forward or back until the door shuts and latches properly.

If the door still moves or jiggles, you might have to enlarge your latch hole on the strike plate. This is more frequent for older doors, but could be due to wear and tear, hinge mortises that are too narrow or not the right size for the latch, or because of damaged or broken strike plate that is damaged or broken. If this is the situation then you should use a filing made of metal instead of a chisel or hammer to adjust the strike plate.

Remove the Latch

The latch is the metal piece that is angled that moves through the hole that runs along the inside edge of your door. The latch is pushed forward when you turn the handle. It also hooks into a hole in the frame of the door to keep your door shut. If your bifold door handle replacement is wiggles when you close it, changing the latch may be all you need to fix it.

It's difficult to identify the screws that secure the latch to the door, however there's usually a tiny slot on the trim plate that lets you to insert a screwdriver and take it off. Once you've removed the trim plate, it will be easy to remove the latch and the bolts that keep the latch and spindle in the position.

If the latch cannot be easily removed then use a paperclip tool to take it off the handle mechanism. Place the item into the recessed slot of the latch and gently twist it or jiggle until you feel the handle and latch begin to break off. It is possible to repeat this procedure several times before you can pull the latch out.

It should be possible to slide the new latch into its slot without any issues once you have removed the old one. Make sure the latch is positioned correctly in the slot and is aligned with the screw chambers, and then use your new screws to fasten it to the strike plate and door frame.

Before you install the new handle, be sure to measure your existing backset (the distance from the center of the big hole on the front of the door to the edge). Verify that the size of the latch of the new window handle replacement matches the measurement.

If you're replacing the latch or handle or handle, or if your previous lock cylinder has been damaged, then you'll require an entirely new one. If you're not changing locks the new lock should fit into your existing recess, and also work with the keys you have already. Be sure to choose the latch with rectangular cover plates that match your handles.

Remove the cover plate

Door handles can begin to look shabby with time However, if you replace them with a contemporary lever on rose design it's an easy and quick DIY project and decorating idea that will enhance the overall appearance of your home. You can purchase complete sets that include matching escutcheons as well as privacy adaptor kits.

To replace an internal door handle take off the cover plate (or rose) that protects the screws and the inner mechanism. Find an opening tab on the plate and make use of a flathead screwdriver to pop it off the knob. It could have a slot on one edge or be held by a pin.

Remove the screw holding the interior handle and place it aside when the cover plate has been removed. It is also necessary to take out the screws that hold the latch and the plates inside to the door, which you can accomplish by loosening them using the help of a Philips screwdriver. Then, you can remove the outer plates and latch plate from the door and set them aside.

Not all doors have this gap. If yours isn't allow for a handle, you'll have to drill a hole in the door. This is the same procedure for opening a locked door, but you will need to be extra careful not to scratch the door's frame or frame.

The installation of new door knob screws is necessary after the holes have been drilled. Make sure to buy the same size as the old ones, so that you won't have a handle that's too tight or too loose. Installing a new strike rod and latch is also required. They aren't included in all door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great choice if you're in the market of a premium interior door handle replacement set. It's a factory-fit and has received a plethora of five-star reviews from delighted customers. It's a great option to replace worn or damaged interior door hardware on your Chevy.